Electrolux EIFLS60LT - Manual (Page 3)

3 Installation Requirements
Tools and materials needed for installation:
Pre-installation requirements
Adjustable
pliers
Adjustable
wrench
3/8” or 10 mm
box wrench
OR OR OR AND AND
Ratchet and
socket set
Carpenter’s level Optional
universal wrench
Please read and save this guide
Thank you for choosing Electrolux, the new
premium brand in home appliances. These
Installation Instructions are part of our commitment
to customer satisfaction and product quality
throughout the life of your new appliance.
Questions?
Installation Checklist
Drain
‰ Stand pipe or wall drain height minimum 24”
‰ Drain hose snapped in “U” channel
(shipped in drum)
‰ Drain hose secured in place with cable tie
(shipped in drum)
Door Reversal
‰ Follow detailed instructions in this guide
‰ Test hinge and latch for function
Electrical Power
‰ House power turned on
‰ Washer plugged in
Final Checks
‰ Installation Instructions and Use and Care
Guide read thoroughly
‰ Door locks and water enters drum when
cycle starts
‰ Registration card sent in
Shipping Hardware
‰ Foam shipping support (under wash tub)
removed and stored
‰ Shipping bolts and spacers removed from
rear of appliance and stored
‰ Hole plugs (shipped in bag in drum)
installed in holes in backsheet
Leveling
‰ Washer is level, side-to-side and front-to-
back
‰ Cabinet is setting solid on all corners
Water Supply
‰ Use only new hoses and verify rubber
sealing washers are installed
‰ HOT supply is connected to HOT inlet and
COLD supply is connected to COLD inlet
‰ HOT and COLD water supply turned on
‰ No leaks present at water supply
connections or appliance inlet connections -
recheck in 24 hours
For toll-free telephone support in the U.S.:
1-877-4ELECTROLUX (1-877-435-3287) and in
Canada: 1-800-265-8352.
For online support and product information visit
www.electroluxappliances.com.
Inlet hose (x2)
NOTE
Hoses are not included with washer purchase.
See “Accessories” section for various inlet hose
kits to fi t your specifi c installation.