Electrolux EI30EF35JS - Manual (Page 18)

18
The fully extendable Luxury-Glide™ rack makes
food preparation easier. This oven rack has glide
tracks that allow the rack to be pulled away from
the oven without rubbing the sides of the oven wall.
Removing and replacing the
Luxury-Glide™ oven racks
To remove - Using one hand, reach through handle
opening and lift up on the release lever located
across the lower front of the rack as shown in
Figure 1.
While holding up the release lever, pull the glide
rack out of the oven until the stop position is
reached (see Figure 2). Using both hands, grasp
the upper and lower portions of the glide rack. Lift
up the front of the rack slightly and continue to pull
the rack away from the oven (see Figure 3). Be
sure to grasp both upper and lower rack portions
together when removing or handling the glide rack .
The rack portions move independently and are
difficult to handle unless held together.
To replace - grasp both upper and lower portions of
glide rack, lift and hold the rack level between the
oven cavity walls. Tilt the front of the rack upward
slightly and slide the rack completely into position.
Some force may be necessary to make sure the
oven rack has snapped completely into place.
Luxury Glide™ oven racks
IMPORTANT
Remove ALL oven racks before starting a self-
clean cycle. If oven racks are left inside the oven
during a cleaning cycle, the slide ability of the
Luxury-Glide™ oven racks may be damaged and
all of the oven racks will lose their shiny finish.
Clean oven racks according to the instructions
provided in the Care & Cleaning section.
Oven Cooking
IMPORTANT
To prevent possible damage to the oven, DO
NOT attempt to close the oven door until all the
oven racks are fully positioned back inside the
oven cavity.
Fig. 1
Fig. 2
Fig. 3
upper rack
portion
lower rack
portion
Luxury-Glide™ extendable oven
rack
release
lever