Electrolux EI16DDPRKS - Manual (Page 6)

List of Included Parts for model
EI16DDPRKS:
• (1) Blower
• (4) 1/4” Lag Bolts
Hardware Needed
(User Supplied)
• 14 AWG Romex Cable (Min. Size)
6 Dimensions
Remote Blower Dimensions
Specifi cations and Dimensions
NOTE
All dimensional tolerances are +1/16”, -0”
unless otherwise stated.
Before starting installation, remove the cover
from the Blower Main Housing. Check to see if
the blower wheel turns freely. Do not replace the
cover until the installation of the Blower Main
Housing is complete.
IMPORTANT
Retain all packing and materials until the
telescoping downdraft and all components
have been installed.
IMPORTANT
Local building codes must be followed in specifying
approved type and specifi cation of ALL duct used.
Discharge
Discharge
10-5/16"
(26.2 cm)
8-3/16"
(20.8 cm)
19-3/4"
(50.2 cm)
16-15/16"
(43 cm)
9-13/16"
(24.9 cm)
16"
(40.6 cm)
1-13/16"
(4.6 cm)
6-15/16"
(17.6 cm)
16"
(40.6 cm)
2-15/16"
(7.5 cm)
12-13/16"
(32.5 cm)
Ø 10"
(25.4 cm)
30"
(76.2 cm)
30-5/8"
(77.8cm)
19-5/8"
(49.8 cm)
(4) Mount
Points
Main
Blower
Housing
Blower
Cover
Air Inlet
Duct 10”
14"
(35.6 cm)
Discharge
3-1/4" (8.3 cm)
4” (10.2 cm)
4-3/4” (12.1 cm)
Adjustable Discharge
Electrical
Conduit
Connection