Control panel – Electrolux EWG127410W User Manual

Page 5

Advertising
background image

CONTROL PANEL

Below is a picture of the control panel. It shows the programme selector dial as well as
the buttons, pilot light and the display. These are presented by relevant numbers on
the following pages.

1

2

4

5

6

7

8

9 10

3

1

Programme selector dial

2

TEMPERATURE button (Temp.)

3

SPIN REDUCTION button (Centri-
fug.)

4

EASY IRON button (Planchado fácil)

5

EXTRA RINSE button (AquaCare)

6

DELAY START button (Inicio diferi-
do)

7

Display

8

START/PAUSE button (Inicio/Pau-
sa)

9

DOOR LOCKED light

10

TIME MANAGER buttons

PROGRAMME SELECTOR DIAL
It allows you to switch the appliance on/off
and/or to select a programme.

TEMPERATURE
This button allows you to increase or de-
crease the washing temperature. At the po-
sition

, the machine will perform a wash-

ing cycle with cold water.

SPIN REDUCTION
By pressing this button you can change the
spin speed of the selected programme or
to select Rinse Hold or Night Cycle option.

NIGHT CYCLE
By selecting this function the machine will
not drain the water of the last rinse and all
spinning phases will be suppressed, so as
not to wrinkle the laundry. This washing cy-

cle is very quiet and it can be selected at
night or in times with a more economical
power rate. On some programmes the rin-
ses will be performed with more water. Be-
fore opening the door it will be necessary to
empty out the water. To empty out the wa-
ter, please read the paragraph «At the end
of the programme».

RINSE HOLD
By selecting this function the water of the
last rinse is not emptied out to prevent the
fabrics from creasing. Before opening the
door it will be necessary to empty out the
water. To empty out the water, please read
the paragraph «At the end of the pro-
gramme».

electrolux 5

Advertising