Technical data, Installation – Electrolux EWG127410W User Manual

Page 22

Advertising
background image

Problem

Possible cause/Solution

Spinning starts late or the machine does not
spin:

The electronic unbalance detection device has
cut in because the laundry is not evenly distrib-
uted in the drum. The laundry is redistributed by
reverse rotation of the drum. This may happen
several times before the unbalance disappears
and normal spinning can resume. If, after some
minutes, the laundry is still not evenly distributed
in the drum, the machine will not spin.
• Redistribute the laundry.

The machine makes an unusual noise:

The machine is fitted with a type of motor which
makes an unusual noise compared with other
traditional motors. This new motor ensures a
softer start and more even distribution of the
laundry in the drum when spinning, as well as
increased stability of the machine.

No water is visible in the drum:

Machines based on modern technology operate
very economically using very little water without
affecting performance.

If you are unable to identify or solve the
problem, contact our service centre. Before
telephoning, make a note of the model, se-
rial number and purchase date of your ma-
chine: the Service Centre will require this
information.

Mod. ... ... ...
Prod. No. ... ... ...

Ser. No. ...

TECHNICAL DATA

Dimensions

Width / Height / Depth

596 / 820 / 544 mm

Electrical connection

Voltage
Overall power
Fuse
Frequency

220-230 V
2000 W
10 A
50 Hz

Water supply pressure

Minimum
Maximum

0,5 bar (0,05 MPa)
8 bar (0,8 MPa)

Level of protection against ingress of solid particles and moisture

IPX4

Water supply

1)

Cold water

Maximum Load

Cotton

7 kg

Spin Speed

Maximum

1200 rpm

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

INSTALLATION

UNPACKING
All transit bolts and packing must be re-
moved before using the appliance.
You are advised to keep all transit devices
so that they can be refitted if the machine
ever has to be transported again.

1. After removing all the packaging, care-

fully lay machine on it’s back to remove
the polystyrene base from the bottom.

22 electrolux

Advertising