Ampro Corporation 420 - Manual (Page 46)

Chapter 3 Hardware
40 Reference Manual CoreModule 420
Pin # Signal Description
38 VSYNC Vertical Sync – This signal is used for the digital vertical sync output to the
CRT. Also used (with HSYNC) to signal power management state information
to the CRT per the VESA
™ DPMS™ standard.
39 AGNDR Analog Ground for Red
40 RED Red – This pin provides the Red analog output to the CRT.
41 AGNDG Analog Ground for Green
42 GREEN Green – This pin provides the Green analog output to the CRT.
43 AGNDB Analog Ground for Blue
44 BLUE Blue – This pin provides the Blue analog output to the CRT.
Notes: The shaded area denotes power or ground. The signals marked with * indicate active low.