Axis Communications 207/207W - Manual (Page 7)

7 AXIS 207/207W - Product Features
Overview
Lock ring
Network
connector
Network
indicator
Control
button
Product ID &
serial number
(S/N) label
Wireless indicator
Power
indicator
I/O terminal
connector
Power
connector
(AXIS 207W only)
Focus ring
Status
indicator
(outer ring)
Microphone
Antenna
(AXIS 207W only)
Antenna (AXIS 207W only) - For connection to wireless networks. Compatible with
IEEE802.11g networks at speeds of up to 54 Mbit/s.
Microphone - Built-in microphone for one way MPEG-4, ISMA, 3GPP compatible audio.
Power Connector - For connection of the PS-L (AXIS 207) or PS-H (AXIS 207W) power
adapter (included).
I/O Connector - The I/O terminal connector provides the physical interface to one
transistor output, one digital input and an auxiliary connection point for DC power. For
more information, see The I/O Terminal Connector, on page 37.
Network Connector - The AXIS 207 connects to the network via a standard network cable,
and automatically detects the speed of the local network segment (10BaseT/100BaseTX
Ethernet). The AXIS 207W can also be connected using a crossover cable - the cable type is
automatically detected.
Product ID & Serial Number Label - The serial number may be required during
installation.
Control Button - Press this button to install using the AXIS Internet Dynamic DNS Service,
or to restore the factory default settings, as described in Resetting to the Factory Default
Settings, on page 36.