Audiovox VOD702 - Manual (Page 5)

- 5 -
Main Function Descriptions
1. Infrared Transmitter and Sensor – Use to transmit audio
to wireless headphones. Also allows the remote control to
operate the VOD702 and to control other accessories in the
system.
2. POWER Button – Bright red when system is on dim when
off.
3. PLAY Button – This button is used to enter the play mode .
4. STOP Button.
5. FMM Button – FM Modulator On/Off.
6. VOLUME UP Button – Use this button to raise the volume
level of the headphone jacks. It is also used to make picture
adjustments in picture select mode.
7. VOLUME DOWN Button – Use this button to decrease the
volume level of the headphone jacks. It is also used to
make picture adjustments in picture select mode.
Note : These buttons will not affect the volume of wireless
headphones or the wired RF modulator. When using these
devices the volume must be adjusted with the wireless
headphone volume control or with your radio’s volume control
(see page 15, Wireless Headphones, or page 16, Wired FM
Modulator).
8. PICTURE SELECT Button – Each time this button is
pressed, the on screen picture adjustment display cycles
through “adjustment bars” for BRIGHTNESS, CONTRAST,
COLOR and TINT. Once the desired adjustment bar is
displayed, use the VOLUME UP/DOWN buttons to adjust
the setting. The display will automatically turn off if no
adjustments are made within 6 seconds, or if any other button
is depressed.
9. NEXT Button – Allows the user to advances to the next
chapter, track or scene during playback.
CHANNEL UP Button – Use this button to increase the
channel number to the desired number.
Note : When TV
function is selected.
10. PREV Button – Allows the user to goes back to the preceding
chapter, track or scene during playback.
CHANNEL DOWN Button – Use this button to decrease the
channel number to the desired number.
Note : When TV
function is selected.
11. SOURCE Select ( TV, AV1, AUX, DVD)
12. Dome Lights – Provide additional interior illumination.
13. Drop Down LCD Panel