Electrolux ESI6700RAX - Manual (Page 29)

Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Manual Elec-
tronic
29 - 36 51 - 64 5.1 - 6.4 36 - 45
2
1) 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35
2
1) 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
2
1)
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2
< 4 < 7 < 0.7 < 5
1
2)
1
2)
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soften-
er manually and electronically.
Manual adjustment
Turn the water hardness dial to the posi-
tion 1 or 2.
Electronic adjustment
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to “Set-
ting and starting a programme”.
2. Press and hold, at the same time, De-
lay and EnergySaver until the indica-
tors , and
start to flash.
3. Press MyFavourite,
•
The indicators and
go off.
• The indicator continues to
flash.
• The display shows the current set-
ting of the water softener. E.g.
= level 5.
4. Press MyFavourite again and again
to change the setting.
5. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
ENGLISH 29