Daily use, 1 activating and deactivating, 2 automatic switch off – Electrolux EHL7640FOK User Manual

Page 26: 3 the heat setting, 4 using the cooking zones, 5 bridge function

Advertising
background image

3.4 OptiHeat Control (3 step

Residual heat indicator)

WARNING!

/ / There is a risk of

burns from residual heat. The

indicator shows the level of

the residual heat.

The induction cooking zones make the

heat necessary for cooking process

directly in the bottom of the cookware.

The glass ceramic is heated by the heat of

the cookware.

4. DAILY USE

WARNING!

Refer to Safety chapters.

4.1 Activating and deactivating

Touch for 1 second to activate or

deactivate the hob.

4.2 Automatic Switch Off

The function deactivates the hob

automatically if:
• All cooking zones are deactivated.

• You do not set the heat setting after

you activate the hob.

• You spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• The hob gets too hot (e.g. when, a

saucepan boils dry). Let the cooking

zone cool down before you use the

hob again.

• You use incorrect cookware. The

symbol comes on and the cooking

zone deactivates automatically after 2

minutes.

• You do not deactivate a cooking zone

or change the heat setting. After some
time comes on and the hob

deactivates. See below.

The relation between heat setting and

times of the function:

,

1 — 3 — 6 hours

4 — 7 — 5 hours

8 — 9 — 4 hours

10 — 14 — 1.5 hours

4.3 The heat setting

To set or change the heat setting:
Touch the control bar at the correct heat

setting or move your finger along the

control bar until you reach the correct heat

setting.

4.4 Using the cooking zones

Put the cookware on the cross / square

which is on the surface that you cook.

Cover the cross / square fully. Induction

cooking zones adapt to the dimension of

the bottom of the cookware automatically.

You can cook with the large cookware on

two cooking zones at the same time.

4.5 Bridge function

This function connects two cooking zones

and they operate as one.
First set the heat setting for one of the

cooking zones.
To activate the function for left / right
cooking zones: touch / . To set or

change the heat setting touch one of the

left / right control sensors.

www.electrolux.com

26

Advertising