Electrolux EHI8742FOK - Manual (Page 6)

sensor field function
10 To activate and deactivate the appliance.
11 To set the cooking zone.
2.3 Heat setting displays
Display Description
The cooking zone is deactivated.
- The cooking zone operates.
The function operates.
The Automatic Heat Up function operates.
Power function operates.
+ digit There is a malfunction.
/ / OptiHeat Control (3 step Residual heat indicator) : continue
cook / stay warm / residual heat.
Lock/The Child Safety functions operates.
Not correct cookware or too small or no cookware on the
cooking zone.
The Automatic Switch Off function operates.
2.4 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
\ \ The risk of burns from
residual heat!
OptiHeat Control shows the level of the re-
sidual heat. The induction cooking zones
make the heat necessary for cooking di-
rectly in the bottom of the cookware. The
glass ceramic is hot from the heat of the
cookware.
3. DAILY USE
3.1 Activation and deactivation
Touch for 1 second to activate or deac-
tivate the appliance.
The control panel comes on after you acti-
vate the appliance and goes off after you
deactivate the appliance.
When the appliance is deactivated you can
see only
sensor field.
3.2 Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after you
activate the appliance.
• You spill something or put something on
the control panel for more than 10 sec-
onds, (a pan, a cloth, etc.). An acoustic
signal sounds some time and the appli-
ance deactivates. Remove the object or
clean the control panel.
• The appliance becomes too hot (e.g.
when, a saucepan boils dry). Before you
use the appliance again, wait for the
cooking zone to cool down.
• You use incorrect cookware. The symbol
comes on and the cooking zone de-
activates automatically after 2 minutes.
6 www.electrolux.com