Airlink101 AWLH3025 - Manual (Page 17)

Item Description
- 13 -
For TI-Based WLAN with encryption
Mode Displays the type of connection: Access Point or
Peer-to-Peer.
Ch Displays the channel that is currently in use.
Signal Displays the signal strength of the connection
between the Wireless Network Adapter and the Access
Point it connects to.
BBS ID Displays the MAC address of the target device.
Current Configuration
Pref. SSID Shows the current SSID the wireless network
adapter is connected to.
BSS Type Shows the current connection type: Access Point or
Peer to Peer.
Channel Shows the current channel.
Tx Rate Shows the current transfer rate.
Signal Quality Shows the signal strength of the connection
between the wireless network adapter and the
device it connects to.
BSSID The MAC address of the device that the wireless
network adapter is connected to.
Connect Highlight one of the devices from the device list
and press the Connect button to access it.
Modify There will be two tabs for you to modify, see the
detailed information on next page.
Rescan Searches all available networks. Clicking on this
button, the wireless adapter will start to rescan and
list all available devices.