Electrolux EJN2301AOW - Manual (Page 15)

• Loosen and remove the lower pin.
On the opposite side:
• Tighten the lower pin.
• Install the lower door.
• Tighten the middle hinge.
• Install the spacer.
• Install the upper door.
• Tighten the upper pin.
VENTILATION REQUIREMENTS
5 cm
min.
200 cm 2
min.
200 cm 2
The airflow behind the appliance must be
sufficient.
INSTALLING THE APPLIANCE
CAUTION!
Make sure that the mains cable
can move freely.
Do the following steps:
x
x
If necessary cut the adhesive sealing strip
and apply it to the appliance as shown in
figure.
ENGLISH 15