Electrolux ESL4560RA - Manual (Page 29)

7.1 Using the detergent
20
30
M AX
1 2 3
4
+ -
A B
C
1. Press the release button (B) to open
the lid (C).
2. Put the detergent in the compartment
(A) .
3. If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.
4. If you use detergent tablets, put the
tablet in the compartment (A).
5. Close the lid. Make sure that the re-
lease button locks into position.
7.2 Setting and starting a
programme
The Auto Off function
To decrease the energy consumption, this
function automatically deactivates the ap-
pliance a few minutes after:
• You have not closed the door to start
the programme.
• The programme is completed.
Reset function
For some settings it is necessary that the
appliance is in user mode.
To set the appliance in user mode, do the
Reset function.
1. Press and hold, at the same time,
Program and MyFavourite until the
display shows the programme P1.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance. The display shows the
number and the duration of the last
set programme.
3. Set a programme.
• If you want to start the last set pro-
gramme, close the appliance door.
• If you want to set the MyFavourite
programme, press MyFavourite.
• If you want to set a different pro-
gramme, press Program again and
again until the display shows inter-
mittently the number and the dura-
tion of the programme you want to
set. If you want you can set the ap-
plicable options.
4. Close the appliance door. The pro-
gramme starts. The programme dura-
tion starts to decrease with steps of 1
minute.
Starting a programme with delay
start
1. Set the programme.
2. Press Delay again and again until the
display shows the delay time you want
to set (from 1 to 24 hours).
• The display shows intermittently the
programme number, the pro-
gramme duration and the delay
time.
• The Delay indicator comes on.
3. Close the appliance door. The count-
down starts.
• When the countdown is completed,
the programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while
the countdown operates
Do the Reset function.
ENGLISH 29