Setting the flame size, Turning the burner off, Operation - oven – Bosch HGS7282UC User Manual
Page 19: About the oven, Operation, Setting the cooking mode and temperature, Press cooking mode, Bake will flash in the display, Bake, To change the cooking mode, turn knob
English 17
is clean and dry. If the burner still fails to ignite, see “Cooktop Troubleshooting
Chart” on page 38
Caution: All ignitors spark when any single burner is turned on. Do not
touch any of the burners when the cooktop is in use.
Lighting the Burner during a Power Failure
Cooktop burners can be lit manually during a power failure. Hold a match at the
port and turn the knob to the HI position. Wait until the flame is burning all the way
around the burner before adjusting the flame to the desired
setting.
Setting the Flame Size
After lighting, turn the knob counterclockwise to the desired flame size. See
“Cooking Guide” on page 23 for recommended burner settings.
Caution: To prevent possible burns or possible damage to the pan or the appli-
ance, the flame should not extend beyond the edge of the pan.
Turning the Burner off
Turn knob clockwise to the OFF position.
Note: an “pop” may be heard when the burner is turned off. The “pop” may be
louder with LP gas than with natural gas. This is normal.
This section explains how to operate the oven. See “Getting the Most Out of Your
Oven” on page 24 for guidelines to improve oven results.
About the Oven
Operation
CAUTION
Do not use aluminum foil or protective liners to line any part of an appli-
ance, especially surface unit drip bowls or oven bottom. Installation of
these liners may result in a risk of electric shock or fire.
Setting the Cooking
Mode
and Temperature
Note: To back out of a current mode, press OFF. (Selecting OFF when not setting
the cooking mode will turn the oven off.)
1.
Press COOKING MODE.
2.
BAKE will flash in the display.
3.
If no change is made within 5 seconds,
control will beep and flash. If this occurs,
press START.
4.
To change the cooking mode, turn knob.
5.
Press START.
6.
The selected mode will appear in the display, along with the default tempera-
ture for that mode, which will be blinking.
7.
To select a different temperature, turn knob to the right or left (in 5° incre-
ments) to desired temperature.
8.
Press START. If not pressed, oven automatically turns on in 5 seconds.
Operation - Oven
BAKE
100
6: 35
PM
380