Bosch Tassimo Hot Beverage System intenso - Manual (Page 17)

15
05/2012
en
8. When the Status LED F (3a) and “Des-
cale required” LED ' (3c) stop blink-
ing, the descaling process is complete.
Empty the receiving container and
return it under the drink outlet (4d).
► Rinse the water tank (5) thoroughly and
i ll up to the max mark with fresh cold
water.
► Return it to your TASSIMO machine.
9. Press the Start / Stop button (2) briel y
to run the cleaning cycle.
10. When the cleaning process is complete,
empty the cup and return it under the
drink outlet (4d).
! IMPORTANT
Please complete steps 9 and 10
four times.
Your TASSIMO machine has now been
properly descaled and cleaned.
11. Open the brewing unit (4), remove the
Service T DISC (6a) and store it in the
compartment (6) for the Service T DISC
and short instructions behind the water
tank.
8.
9. 10.
4 x
11.
TAS47_UC.indb 15 04.05.2012 12:36:20