ALESIS MASTERLINK ML-9600 - Manual (Page 23)

Chapter 6
A LESIS ML-9600 R EFERENCE M ANUAL 1.00 19
N
EW
CD
F
EATURES
5.1 M
OVE
E
NTIRE
CD T
O
P
LAYLIST
MasterLink version 1.0 software gave you the ability to copy Red Book and CD24 tracks
directly to a playlist from the internal CD drive one track at a time (covered in Section 7.2 of
the MasterLink User's Manual). In addition, version 2.0 software gives you the ability to copy
all tracks at once from a Red Book or CD24 disc.
The Move CD to Playlist function is accessed through the TRACK MOVE button while the
MasterLink is in CD mode. Like the CD Track Move function in version 1.0 software, the
Move CD function moves tracks from the CD into the currently selected playlist. It is
important, therefore, to make sure that you have selected the appropriate playlist before
switching to CD mode.
After switching to CD mode (via the HD/CD button), pressing the TRACK MOVE button
will bring up the CD track move page, as shown in Figure 5.1.1.
Figure 5.1.1
CD Track Move Page
To copy an entire CD to the currently selected playlist, press the CURSOR LEFT button until
the cursor is under the "CDTrk" field, then press the UP/YES button, which will bring up the
display shown in Figure 5.1.2.
Figure 5.1.2
Move CD to Playlist Page
Pressing TRACK MOVE again will prompt you with an "Are you sure? Y/N" message.
Pressing DOWN/NO at that point will cancel the CD Move operation. Pressing UP/YES at the
prompt will confirm the CD Move and will begin the process.