Aastra Telecom BE-3872 - Manual (Page 7)

Do the following:
• Choose the best location
• Connect the phone
• Choose the dialing mode
Where you place the phone affects the reception quality of the handset:
• Away from another cordless telephone
• Place the base near an AC electrical outlet and near telephone line jack
• Place the base away from metal walls and metal file cabinets
CAUTION: The cordless telephone operates at a frequency that may cause
interference to nearby TVs and VCRs; the base phone should not
be placed near, or on top of a TV or VCR. If interference is experi-
enced, moving the cordless telephone farther away from the TV or
VCR will often reduce or eliminate the interference.
Note: While the 2.4GHz frequency is inherently clearer, we suggest that
you do not use this phone within 20 feet of a working microwave.
The microwave produces frequencies in this range which may
cause interference. This interference is normal for all 2.4GHz
phones and should not be considered a product defect.
12
CHOOSING A LOCATION
Away from noise sources such as a
window by a street with heavy traffic
Away from VCRs and TV sets and
other electronic equipment
Away from heat sources, such as
radiators, air ducts, and sunlight
Away from a microwave oven
Away from excessive
moisture, extremely low
temperatures, dust,
mechanical vibration, or
shock
Away from a
personal computer
Near a central
location and on a
level surface
Data Jack
Used for connecting a
telephone device such
as a computer modem
or fax machine.
Ringer Switch (On/Off)
Used to set the base ringer
On or Off.
Tone/Pulse Switch
Used to set the dialing
method for tone or pulse
dialing.
Ring Count Switch (2/4/TS)
Used to set the number of
rings before the answering
machine picks up to either 2,
4, or Tollsaver 2/4 (TS) rings.
Answer Switch (Only/ICM)
Used to set the phone to answer and let the caller leave a message (ICM) or
only play the announcement and not let the caller leave a message (ONLY).
Base Bottom View
LOCATION OF CONTROLS AND FEATURES
Base Back View
11
!
Data Jack
Antenna
Ring Count Switch
Tone/Pulse Switch
Ringer Switch
Answer Switch