AEG LAVAMAT 16820 - Manual (Page 55)

Permanent connection
In the case of a permanent connection it is necessary that you install a
double pole switch between the appliance and the electricity supply
(mains), with a minimum gap of 3 mm between the switch contacts and
of a type suitable for the required load in compliance with the current
electrical regulations.
The switch must not break the yellow and green earth cable at any
point.
This operation should only be performed by a qualified electrician.
55
Installation
132988620.qxd 12/07/2004 16:07 Pagina 55 (Nero/Process Black pellicola)