Asus CROSSHAIR E2711 - Manual (Page 101)

ASUS Crosshair -
USB Configuration
The items in this menu allows you to change the USB-related features. Select an
item then press <Enter> to display the configuration options.
USB Controller [Enabled]
Allows you to enable or disable the onchip USB controller.
Configuration options: [Disabled] [Enabled]
USB 2.0 Controller [Enabled]
Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Disabled] [Enabled]
USB Legacy Support [Enabled]
Allows you to enable or disable support for USB devices on legacy operating
systems (OS). Configuration options: [Disabled] [Enabled]
Onboard 1394 [Enabled]
Allows you to disable or enable the onboard 1394 device support.
Configuration options: [Disabled] [Enabled]
Onboard 1st/2nd Nvidia LAN [Enabled]
Enables or disables the onboard NVIDIA ® LAN controller.
Configuration options: [Disabled] [Enabled]
OnBoard nVidia LAN Boot ROM [Disabled]
Allows you to enable or disable the onboard LAN boot ROM.
Configuration options: [Enabled] [Disabled]
Primary Display Adapter [PCIEX16_1]
Allows you to select the graphics controller to use as the primary boot device.
Configuration options: [PCI Slot] [PCIEX16_2] [PCIEX16_1]
SATA1/2/3/4/5/6 [Disabled]
Enables or disables the RAID function of the first to sixth SATA master drive.
Configuration options: [Disabled] [Enabled]
Select Menu
Item Specific Help
Enable or disable
the USB 1.1 and 2.0
Controller.
Phoenix-Award BIOS CMOS Setup Utility
Advanced
USB Configuration
USB Controller [Enabled]
USB2.0 Controller [Enabled]
USB Legacy support [Enabled]