Audiovox Rampage ACD-84 - Manual (Page 7)

indication appears on the display panel.
Within 5 seconds of choosing the Bass
mode, rotate the AUDIO CONTROL knob
2
in the DN direction to decrease the bass
response, or in the UP direction to increase
it as desired. The level will be shown on the
display panel from a minimum of BAS -12
to a maximum of BAS +12 (BAS 00
indicates flat response). The display will
automatically return to the normal indication
5 seconds after the last adjustment or when
another function is activated.
5
TREBLE CONTROL
To adjust the treble level (equalizer function
inactive), first select the Treble mode by
pressing the SEL button
3
so the TRE
indication appears on the display panel.
Within 5 seconds of choosing the Treble
mode, rotate the AUDIO CONTROL knob
2
in the DN direction to decrease the treble
response or the UP direction to increase it
as desired. The level will be shown on the
display panel from a minimum TRE -12 to a
maximum of TRE +12 (TRE 00 indicates flat
response). The display will automatically
return to the normal indication 5 seconds
after the last adjustment or when another
function is activated.
6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first
select the Balance mode by pressing the
SEL button
3
so the BAL indication
appears on the display panel. Within 5
seconds of choosing the Balance mode,
rotate the AUDIO CONTROL knob
2
in the
DN direction to adjust the stereo balance to
the left channel speakers or the UP direction
to adjust it to the right channel speakers.
The balance position will be shown on the
display panel from BAL L16 (full left) to BAL
R16 (full right). When the volume level
between the left and right speakers is equal,
BAL 00 will be shown on the display panel.
The display will automatically return to the
normal indication 5 seconds after the last
adjustment or when another function is
activated.
7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first
select the Fader mode by pressing the SEL
button
3
so the FAD indication appears on
the display panel. Within 5 seconds of
choosing the Fader mode, rotate the
AUDIO CONTROL button
2
in the DN
direction to adjust the front-rear speaker
balance to the rear speakers or the UP
direction to adjust it to the front speakers.
The fader position will be shown on the
display panel from FAD R16 (full rear) to FAD
F16 (full front). When the level between the
front and rear speakers is equal, FAD 00
will be shown on the display panel. The
display will automatically return to the
normal indication 5 seconds after the last
adjustment or when another function is
activated.
8
LOUDNESS CONTOUR (LOUD)
When listening to music at low volume
levels, this feature will boost the bass and
treble ranges to compensate for the
characteristics of human hearing. Press the
button momentarily to activate this feature;
the LOUD indication will appear on the
display panel. Pressing the button again
momentarily will deactivate the feature (the
LOUD indication will disappear from the
display panel).
6 6 6 6 6
OPEROPEROPEROPEROPER
AAAAA
TTTTT
ING INSTRUCING INSTRUCING INSTRUCING INSTRUCING INSTRUC
TTTTT
IONSIONSIONSIONSIONS