Water Inc WI-HP-DWF-RC2 - Manual

HousePure Dishwasher Filter Cartridge Change Instructions
WI-HP-DWF-RC2
Twin Pack
• Turn on the dishwasher (start wash cycle) until you hear water start to flow into
dish washer unit.
• Turn off the undersink water supply to dishwasher (sound of water flowing will
stop.
• Turn off the dishwasher or open the door.
• Place a towel under the filter system to absorb any water that may spill during
filter change.
• Using sump (filter bowl) wrench that came with the filter system, turn the sump
to the left until it turns easily.
• Continue unscrewing the sump by hand until the sump drops free.
• Remove the old filter and install a new one making sure the end of filter cartridge
with the large white cap faces up.
• Make sure that the large black o-ring is in place in the groove below threads in
sump, then screw the sump back onto filter head until resistance is felt.
• Using the wrench tighten sump an additional turns until snug.
• Turn the water supply back on and check for leaks.
• Filter system and dishwasher are now ready for use.
• Thanks for buying and using your HousePure DWF. If you have any questions
please give our service department a call at 800-322-9283.
• In the future, if it is more convenient for you can buy on line replacement
cartridges for your HousePure DWF at
www.waterinc.com .