Water Inc HP-RO-1000 - Manual

Model HP-RO-1000 Undersink Reverse Osmosis System
User Manual
HP-RO-1000-Manual Rev. 2-14
OPERATING SPECIFICATIONS
WARNING: Before installing the system, make certain
your water supply complies with the
to do so may reduce the effectiveness
of the system and will void the warranty.
Consult your local water treatment utility
the quality for your water and use the table
below to record your results for future
reference.
Your Water
Pressure Range: 40–100 psi
(2.8–6.9 bar)
Temperature Range: 40–100°F
(4.4-37.8°C)
Total Dissolved Solids < 2000 ppm
Maximum Hardness* † : 10 gpg
(171 mg/L)
† : < 0.1
Chlorine in Water Supply: < 2 ppm
Water Supply pH Limits: 3-11
Turbidity: 5 NTU Max.
Date of Purchase:
* If the hardness of your water is above 10 gpg (171 mg/L), lime scale will build
up rapidly on the membrane inside of the RO membrane cartridge. Scale
buildup will plug the RO membrane cartridge and make the system ineffective.
We do not recommend the HP-RO-1000 to be used with water in excess of 10 gpg
(171 mg/L) hardness, unless the water is softened prior to the reverse osmosis
system.
† See your local dealer or water treatment specialist to reduce these substances
in your water.
HP-RO-1000 Dimensions:
System Dimensions 13" H x 15" W x 4.75" Dia
(330 x 381 x 120.6 mm)
Tank Dimensions 14.5" H x 11" Dia
(368 x 279 mm)
System Weight 23 lbs (10.4 kg)
Tank Capacity 3.2 gal (12.1 L)
Tools Required
•
Hand or Electric Drill
•
Phillips Screwdrivers
•
2 Adjustable Wrenches
•
Drill Bits: 1/8", 1/4" and 3/8"
•
File
•
Towel
•
Pencil
•
Safety Glasses
•
Needle-nose Pliers
•
Tape Measure
•
Utility Knife or Tube Cutter
(for plastic tubing)
Optional Materials
(For sinks without extra hole for faucet)
•
Hand or Electric Drill
•
Center punch
•
Drill Bits: 1/4" and 3/4"
•
Respirator
•
® Tape
•
1-3/8" Bi-metal or Carbide
Tipped Hole-saw
NOTE: All tools listed will not be necessary for installation.
Read installation procedures before starting to
determine required tools.
Parts Included
•
Head Assembly
•
Drain Saddle Valve
•
Screws for mounting
•
Water Supply Adapter
•
Lead-free air gap drinking
water faucet
•
Quick-connect Fitting
•
Silicone grease
•
Storage Tank
•
Tank Valve
•
Faucet Adapter
• ® Tape
•
Change Indication Sticker
•
3/8" Plastic Tubing
(red and blue)
•
1/4" Plastic Tubing
(white, red and green)
•
TDS Test Kit
• Filter Cartridges:
HP-RO-1000 Specifications
Filter Kit (to be changed annually)
PART # WI-HP-RO-1000-FILTER-KIT
Filter Kit Includes:
PW-S2500R Cartridge (Yellow)
PW-C5000R Cartridge (Blue)
PW-C2500R Cartridge (Violet)
Membrane (to be changed every 3-5 years)
PART # WI-HP-RO-1000-MEMBRANE:
PW-RO75R Cartridge (Green)