Myron&Davis NV7CRV1 - Manual (Page 7)

Step 4: Prepare vehicle
harnesses
Step 2 - Connect Myron and Davis
harness to factory harness
Step 3- Connect antenna harnesss
Step 4 - Connect blue power antenna
cable
Step 5 - Install mounting brackets
Step 6 - Install Myron and Davis unit
Step 1 - Remove DVD Player transport
screws
7 - Connecting and installing the Myron & Davis unit
Follow the steps below to ensure proper installation and connection of the Myron & Davis
unit.
Note: To ensure that the video cannot be viewed when the vehicle is in motion,
connect the (blue/white) Brake Wire to the Emergency Brake Switch
(grounded when engaged) .
Note: Carefully route the wire harnesses so they cannot be damaged during the
installation process of the Myron and Davis unit.