Asus P5B SE - Manual (Page 75)

ASUS P5B SE 4-5
PIO Mode [Auto]
Selects the PIO mode.
Configuration options: [Auto] [0] [] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA]
[SWDMA2] [MWDMA0] [MWDMA] [MWDMA2] [UDMA0] [UDMA] [UDMA2]
[UDMA3] [UDMA4] [UDMA5]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration
options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
4.3.5 IDE Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press <Enter> if you wish to
configure the item.
SATA Configuration [Compatible]
Configuration options: [Compatible] [Enhanced] [Disabled]
Configure SATA as [IDE]
Sets the configuration for the Serial ATA connectors supported by the Southbridge chip.
Configuration options: [IDE] [AHCI]
Hard Disk Write Protect [Disabled]
Allows you to enable to disable the hard disk write protection. This will be effective
only if the device is accessed through BIOS.
Configuration options: [Disabled] [Enabled]
SATA Configuration
SATA Configuraton [Enhanced]
Configure SATA as [IDE]
Hard Disk Write Protect [Disabled]
IDE Detect Time Out (Sec) [35]
JMB363 RAID Controller [Enabled]
JMB363 Mode Select [IDE]
Options
Disabled
Compatiable
Enhanced