Troubleshooting – AT&T TL 74208 User Manual

Page 23

Advertising
background image

Appendix

Troubleshooting

19

The charge
light is off.

• Make sure the power and line cords are

plugged in correctly and securely.

• Unplug the unit’s electrical power. Wait for

15 seconds, then plug it back in. Allow up
to one minute for the cordless handset and
telephone base to reset.

• Other electronic products can cause

interference with your cordless phone. Try
installing your phone as far away from the
following electronic devices as possible:
television sets, VCRs, or other cordless
telephones.

• Do not install this phone near a microwave

oven or on the same electrical outlet. You
may experience decreased performance while
the microwave oven is operating.

• If your phone is plugged in with a modem or

surge protector, plug the phone (or modem/
surge protector) into a different location.
If this doesn’t solve the problem, re-locate
your phone or modem farther apart from one
another, or use a different surge protector.

• Relocate your telephone base to a higher

location. The phone will have better
reception when not installed in a low area.

• If the other phones in your home are having

the same problem, the problem is in your
wiring or local service. Contact your local
telephone company (charges may apply).

My calls fade
out or cut in
and out while
I’m using
my cordless
handset.

Advertising
This manual is related to the following products: