AEG LAVAMAT 50212 - Manual (Page 19)

19
What to do if...
Remedying minor malfunctions yourself
If the programme progress display shows one of the following error
messages during operation:
–
(END) flashes 1x (problem with water inflow),
– (END) flashes 2x (problem with water outflow),
– (END) flashes 4x (door open),
please refer to the following table.
After the error has been remedied, press the
(START/PAUSE) but-
ton.
For other error messages (one or more flashing indicators in the pro-
gramme progress display):
Switch the appliance off and then on again. Reset the programme.
Press the
(START/PAUSE) button.
If the error is displayed again, please contact customer service.
Problem Possible cause Remedy
Washing machine is not
working.
Mains plug not plugged in
or fuse not working. Connect the plug to a mains
socket. Check fuse.
Door not closed properly.
Close door until the catch
audibly latches.
The (START/PAUSE)
button was not pressed for
long enough.
Press the (START/
PAUSE) button for longer.
The door cannot be
closed. Child safety device has been
activated. Deactivate the child safety
device.
The (END) indicator
flashes 4x.
The door is not closed prop-
erly. Close the door properly. Re-
start the programme.
The (END) indicator
flashes 1x.
(Problems with water
inflow)
Tap turned off. Turn on the tap.
The filter in the screw con-
nection on the inlet hose is
blocked. Turn off the tap. Unscrew the
hose, remove the filter and
clean it.
Water tap is furred with
lime scale or is faulty. Check the tap and have it re-
paired if necessary.
The washing machine
vibrates when operating
or is not stable.
The transportation lock has
not been removed. Remove the transportation
lock.
The screw feet are not cor-
rectly adjusted.
Adjust the feet as described
in the installation and con-
nection instructions.