Lan driver setup – Asus W1Gc User Manual
Page 30
30
Software
Drivers
LAN Driver Setup
You will see a “Found New Hardware Wizard” if you device requires setup. If not your driver may already
be installed by Windows. If your device is not working, you can manually install the driver as follows:
Normally, you will get a “Found New
Hardware Wizard” as shown on the next
step. If not, double click the Network
Controller with a question mark in “Device
Manager”.
Select “Install from...” and click Next.
Browse to the appropriate folder and click
Next. (path will vary depending on version)
Click Finish when setup is complete.
Click Close to close the properties window.
The driver, when properly setup, will appear
as the above in Device Manager.
WWW
.ASUS.COM
remote
Connect the LAN port to a
network to begin using the
built-in LAN function.