Avaya 6400 - Manual (Page 22)

DSS Key Functions Page 22
DSS Key Functions
Overview
You can program many of the phone’s functions to a DSS key. You can
also program dialing digits or user, group and park slot numbers.
• 4406D+, 4606D+ and TransTalk
® MDW 9040 Telephone:
The DSS keys on the 4406D+, 4606D+ and TransTalk ® MDW 9040 can
only be programmed through the Manager Application. Contact your
System Administrator.
• 4450 DSS module
The buttons of the 4450 DSS module are programmed via the station to
which the 4450 is connected. A user can program a button on the 4450
in the same manner that they would a button on their phone. In the
following sections, the “DSS key” can either be a button on the actual
station, or a button on the 4450 DSS module.
Storing Abbreviated Dialing Under a DSS Key
Each button can be programmed with the number that you would normally
dial. Typically you would use this for an external number or a system or
personal short code, consult your System Administrator for a list of
shortcodes.
To store digits under a DSS key
1. Press Menu
.
2. Using the and keys, display and then select Prog.
3. Press the required DSS key.
4. Enter the number to store. Note: You can store partial strings as after
pressing the DSS key you can dial further digits, e.g. you could store an
international dial prefix for all calls to a particular country.
5. Select Done.
6. Select another DSS key or press Exit
.
or
1. Press Menu
.
2. Using the and keys, display and then select Admin
3. Use the and keys to select AD.
4. Enter the number to store. Note: You can store partial strings as after
pressing the DSS key you can dial further digits, e.g. you could store an
international dial prefix for all calls to a particular country.
5. Press the required DSS key.
6. Select Done.
7. Select another DSS key or press Exit
.
4400, 4600, 6400 & TransTalk MDW 9040 Telephones Page 22
IP Office 40DHB0002USAL - Issue 6 (04/25/2003)