Audiovox Movies2Go 128-8652 - Manual (Page 20)

ACCESSORIES
WIRELESS HEADPHONES (OPTIONAL)
The MMD11 A includes a built-in infrared transmitter for use with the supplied
wireless headphones. The headphone volume is adjusted using the controls on
each headset. Any number of wireless headphones may be used but they must be
used within a line of sight from the transmitter, as infrared transmissions, like visible
light travel only in a straight line. See the documentation accompanying your
wireless headphones.
SOURCE FEATURE
AV1
The video input may be connected to a Video Cassette Player (VCP), video game
system, or other audio / video devices. To access the A/V inputs, turn the MMD11 A on
and press the source button on the MMD11 A or the Source button on the remote
control until "AV1" is displayed on the screen. Turn the video source component on with
its power button or remote control. The MMD11 A is now ready to play the audio and
video signals from the source connected to AV1 input (use
.
AUX
The MMD11 A will accept an audio / video input through the 3 RCA jacks located on the
rear of the unit. The audio / video device could be a video game system, video camera,
or other input device.
Video Out
The MMD11 A provides a video output for optional audio/video monitor(s). This output
will provide an audio/video signal that duplicates the signal displayed by the MMD11 A
to an additional monitor or video display. Please see your installer for more information.
accessory cable part
number 11236820 required)
20 MMD11 A