LG LGLS995 - Manual (Page 175)

Settings 165
Privacy Keeper
You can set whether the phone to display the caller's information or not when you receive a call.
1. Tap > > Systems settings > Call > Privacy keeper.
2. Tap Hide all info, Show number only, or Show caller info.
Auto Answer
Activate to set auto answer with handsfree.
1. Tap > > System settings > Call > Auto answer.
2. Tap Disable, 1 second, 3 seconds, or 5 seconds.
TTY Mode
A TTY (also known as a TDD or Text Telephone) is a telecommunications phone that allows
people who are deaf, hard of hearing, or who have speech or language disabilities, to
communicate by telephone. Your phone is compatible with select TTY phones. Please check
with the manufacturer of your TTY phone to ensure that it is compatible with digital cell phones.
Your phone and TTY phone will connect via a special cable that plugs into your phone's
headset jack. If this cable was not provided with your TTY phone, contact your TTY phone
manufacturer to purchase the connector cable.
Turn TTY Mode On or Off
1. Tap > > System settings > Call > TTY mode.
2. Tap TTY Off to turn TTY mode off or tap TTY Full, TTY HCO or TTY VCO.
To access the state Telecommunications Relay Service (TRS) for assistance with TTY calls:
■ Dial to reach an operator.
For additional information about Sprint Relay Services and TTY compatibility, call Sprint Relay
Customer Service at 800-676-3777 or visit
www.sprintrelay.com .
Note: In TTY Mode, your phone will display the TTY access icon. When enabled, TTY mode
may impair the audio quality of non-TTY phones connected to the headset jack.
WARNING: 9-1-1 Emergency Calling Sprint recommends that TTY users make emergency calls
by other means, including Telecommunications Relay Services (TRS), analog cellular, and
landline communications. Wireless TTY calls to 9-1-1 may be corrupted when received by public
safety answering points (PSAPs), rendering some communications unintelligible. The problem
encountered appears related to software used by PSAPs. This matter has been brought to the
attention of the FCC, and the wireless industry and the PSAP community are currently working
to resolve this.