Switching between and exiting applications – LG D800 User Manual

Page 16

Advertising
background image

16

%

NOTE

The battery must be fully charged

initially to improve battery lifetime.

Your phone has an internal antenna. Be

careful not to scratch or damage this
rear area, as that will cause loss of
performance.

When the battery becomes fully

discharged and you connect the phone
to a charger, the Notification LED lights
will blink. This is normal operation for
a completely discharged battery to
prevent overflowing current because the
phone is designed to provide reasonable
protection against damage to the battery.
Once the battery has enough charge, the
screen will turn on and display a battery
image.

%

Warning

Use only LG-approved chargers, batteries

and cables. When using unapproved
chargers or cables, it may cause slow
charging. Or, unapproved chargers or cables
can cause the battery to explode or damage
the device, which are not covered by the
warranty.

Charging may be interrupted when you

use a USB hub, which is not retained
rated voltage.

%

NOTE

Non-Removable Battery

Your phone has an internal, rechargeable
battery that should be replaced only by
LG or an authorized LG repair center. You
should never try to open or take apart
this phone yourself. Opening the phone
can cause damage that will void your
warranty.

Switching between and
exiting applications

Multi-tasking is easy with Android because
open applications keep running even when you
open another application. There is no need to
quit an application before opening another. Use
and switch among several open applications.
Android manages each application, stopping
and starting them as needed, to ensure that
idle applications don’t consume resources
unnecessarily.

Getting Started

Advertising
This manual is related to the following products: