LG LGD950 - Manual (Page 80)

80
To connect to a Wi-Fi Network
1 From the Home screen, tap the Menu
Key
and tap All settings >
Networks tab > Wi-Fi.
2 Tap the Wi-Fi switch to turn it on
and begin scanning for available Wi-Fi
networks.
•  A list of available Wi-Fi networks will
be displayed. Secured networks are
indicated by a lock icon
.
3 Tap a network to connect to it.
•   If the network is open, you are prompted
to confirm that you want to connect to
that network by tapping Connect.
•   If the network is secured, you are
prompted to enter a password or
other credentials. (Ask your network
administrator for details).
•  Tap the Menu Key to access
additional options.
4 The Status Bar at the top of your screen
will display an icon that indicates your
Wi-Fi connection status.
Turn off Wi-Fi when you're not using it to
extend the life of your battery.
% TIP
• If you are not in range of a Wi-Fi
network and use a network connection,
additional data charges may apply.
% NOTE
• Access to the Internet and a wireless
router required. As an added
convenience, AT&T has shipped certain
smartphones with Wi-Fi enabled as a
default setting. Leaving Wi-Fi enabled
when not connected to a Wi-Fi network
may affect battery charge. Qualifying
data plan required.
• This device supports WEP, WPA/
WPA2-PSK and 802.1x EAP
. (Some
EAP methods are not supported.) If
your Wi-Fi service provider or network
administrator sets encryption for
network security, enter the key in the
pop-up window. If encryption is not
set, this pop-up window will not be
shown. You can obtain the key from
your Wi-Fi service provider or network
administrator.
Bluetooth
Bluetooth is a short-range communications
technology that allows you to connect
wirelessly to a number of Bluetooth
Settings