LG C410 User Manual
Page 101
101
For Your Safety
In the above example, if a hearing aid meets
the M2 level rating and the wireless phone
meets the M3 level rating, the sum of the
two values equal M5. This should provide the
hearing aid user with “normal usage” while
using their hearing aid with the particular
wireless phone. “Normal usage” in this
context is defined as a signal quality that’s
acceptable for normal operation.
The M mark is intended to be synonymous
with the U mark. The T mark is intended to
be synonymous with the UT mark. The M and
T marks are recommended by the Alliance
for Telecommunications Industries Solutions
(ATIS). The U and UT marks are referenced
in Section 20.19 of the FCC Rules. The HAC
rating and measurement procedure are
described in the American National Standards
Institute (ANSI) C63.19 standard.
When you're talking over the cell phone, it's
recommended you'd turn the BT (Bluetooth) or
WLAN mode off for HAC.
This phone has been tested and rated for use
with hearing aids for some of the wireless
technologies that it uses. However, there may
be some newer wireless technologies used in
this phone that have not been tested yet for
use with hearing aids. It is important to try
the different features of this phone thoroughly
and in different locations, using your hearing
aid or cochlear implant, to determine if you
hear any interfering noise. Consult your
service provider or the manufacturer of
this phone for information on hearing aid
compatibility. If you have questions about
return or exchange policies, consult your
service provider or phone retailer.
For information about hearing aids
and digital wireless phones
Wireless Phones and Hearing Aid
Accessibility
FCC Hearing Aid Compatibility and
Volume Control