LG LGUX210 - Manual (Page 69)

Connecting TTY Equipment and a Terminal
1. Connect a TTY cable to TTY connection on the
terminal. (TTY connection location the same as a
hands free earjack)
2. Enter the phone menu and set up the desired
TTY mode. (For a TTY mode, see the chart
above)
3. After setting a TTY mode, check the LCD screen
of the phone for the TTY icon.
4. Connect the TTY equipment to the power
source and turn it on.
5. Make a phone connection to the desired number.
6. When connection is made, use the TTY
equipment to type in and send a text message or
send voice.
7. The voice or text message from the receiver end
displays on the TTY equipment display.
5.8 Airplane Mode
Allows you to use the general application and
restricts the output of RF communication.
1. Press , , , .
2. Use to select a setting, then press .
On / Off
69
SETTINGS
UX210_Eng.qxd 6/22/06 3:27 PM Page 69