LG GS390GO - Manual (Page 85)

Settings
80
] : You cannot make (or receive) any
calls, including emergency calls or use
other features that require network
coverage.
] : Deactivates Flight Mode and re-
establishes your wireless connections.
Security
Various codes and passwords are used to
protect the features and settings of your
phone. They are described in the following
sections.
] Phone lock: You can use a security code
to avoid unauthorized use of the phone.
If you set phone lock to When Power On,
the phone will request a security code
whenever you switch the phone on. If you
set the phone lock to When SIM Changed,
your phone will request a security code
only when you change your SIM Card. If
you set the phone lock to Lock Phone Now,
your phone will lock immediately.
] Change Codes: The Change codes
feature allows you to change your current
password to a new one. You must enter the
current password before you can specify a
new one. You can change the access codes
for: Security Code, PIN1, PIN2
] PIN Code Request: When the PIN code
request feature is set to , you must
enter your PIN each time you switch the
phone on. Consequently, any person who
does not have your PIN cannot use your
phone without your approval.
n Note
Before setting the PIN code request feature to
Off, you must enter your PIN.
The following options are available:
] : You must enter the PIN each time
the phone is switched on.
] : The phone connects directly to the
network when you switch it on.
] Fixed Dial Number: This allows you to
restrict your outgoing calls to selected
phone numbers, if this function is
supported by your SIM Card. The PIN2
code is required.
W