LG Octane VN530 - Manual (Page 24)

22 Octane
TM
Getting Started with Your Phone
NOTE
Using the phone with the adapter may
cause an abrupt reset if the phone does
NOT have the battery inserted.
1. Connect the USB data cable into
the Wall/USB charger.
When connecting as shown below,
the LG logo on the USB data
cable should face toward you.
2. Gently uncover the Accessory/
Charger Port, then plug the end
of the adapter into the phone’s
charger port and the other end
into an electrical outlet.
3. The charge time varies
depending upon the battery
level.
Charging with USB
You can use your computer to
charge your phone. To be able to
charge with the USB cable, you
may need to have the necessary
USB drivers installed on your PC
first. Connect one end of the USB
cable to the Accessory/Charger
Port on your phone and the other
end to a powered USB port on
your PC (commonly located on the
front panel of the computer). It is
best to use the rear USB port when
connecting to a desktop PC. A USB
Hub should be powered by an
external power source (see Note
below).
NOTE
● Low-power USB ports are not
supported, such as the USB
port on your keyboard or bus-
powered USB hub.
NOTICE
Please make sure that the
'B' Side faces up before
inserting a charger or data cable into
the charger port of your phone.