LG AF115 - Manual (Page 22)

Function
22
► Fresh Contrast : Adjusts contrast to optimum levels depending on image brightness.
► Fresh Colour : Adjusts image colors close to natural colors.
• This function cannot be set when PC signal is input, the signal is 1080i and 1080p or Aspect Ratio is set as Justscan.
• Noise can occur at the edges of the screen at the signal of 1080i/1080p because of the malfunctioning of an image input
device. In this case, change the signal into the one that can be set with Overscan and set Overscan.
•Fresh Contrast ꔗ Low ꔃ ꔗ High ꔃ
ꔉ OK ꔗ
ꔃ
ꔗ Off ꔃ
•Fresh Colour ꔗ Off ꔃ ꔗ Low ꔃ
ꔉ OK ꔗ
ꔃ
ꔗ High ꔃ
► Color Temp : Selects the mood of screen colors.
• You can also use the C.TEMP button on the remote control.
• Color Temp. ꔗ Medium ꔃ ꔗ Cool ꔃ
ꔗ
ꔃ
ꔗ Natural ꔃ ꔗ Warm ꔃ
ꔉ OK
► Noise Reduction : Removes noise from image without damaging it.
• You can use it only in Video, S-Video, Component(480i, 480p, 576i, 576p) and HDMI(480p, 576p) modes.
• Noise Reduction ꔗ On ꔃ ꔗ Off ꔃ
ꔗ
ꔃ
ꔉ OK
► Gamma : Sets the intensity of the picture.
• You can also use the GAMMA button on the remote control.
• Gamma ꔗ Low ꔃ ꔗ Medium ꔃ
ꔗ
ꔃ
ꔗ High ꔃ
ꔉ OK
► Real Cinema : Set up the picture for the best picture appearance for viewing movies.
• You can use it only in Video, S-Video, Component(480i/576i/1080i 50/60Hz, 1080p 24Hz) and
HDMI(1080i 50/60Hz, 1080p 24Hz) modes.
• Real Cinema ꔗ Off ꔃ ꔗ On ꔃ
ꔗ
ꔃ
ꔉ OK
► Black Level : Adjusting the contrast and the brightness of the screen using the black level of the screen.
• You cannot set this function in SECAM, PAL 60 and PAL BGDK signals of Video, S-Video and RGB modes.
• Black Level ꔗ Low ꔃ ꔗ High ꔃ
ꔗ
ꔃ
ꔉ OK
► Lamp Mode : Adjusts the lamp brightness.
• Lamp Mode ꔗ High ꔃ ꔗ Low ꔃ
ꔉ OK ꔗ
ꔃ
► Overscan : You can adjust from 90, 92, 94...100.
• Overscan ꔗ 90 ꔃ ~ ꔗ 100 ꔃ
ꔉ OK ꔗ
ꔃ