LG LGLS696 - Manual (Page 23)

Device Basics 14
Turn Your Device On and Off
Turn your device on and off and wake-up the screen by using the Power/Lock Button.
Turn Your Device On
► Press and hold
.
Once your phone is on, it may display ―Searching for Service. ” When your phone finds a signal,
it enters standby mode – the phone‗s idle state. At this point, you are ready to begin making and
receiving calls.
If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is
automatically activated. When a signal is found, your phone automatically returns to standby
mode.
In Power Save mode, your phone searches for a signal periodically without your intervention.
You can also initiate a search for Sprint service by pressing any key (when your phone is turned
on).
Tip: The Power Save feature conserves your battery power when you are in an area where
there is no signal.
Turn Your Device Off
1. Press and hold for two seconds until you see the powering-down animation on
the display screen.
2. Tap Power off and then tap OK to power off the device.
Your screen remains blank while your phone is off (unless the battery is charging).
Wake Up the Screen
If you don‗t use the device for a while, the screen and backlight will shut off to conserve battery
power.
To wake up the device's screen:
1. Press . Your lock screen will appear. See Set Up Screen Lock .
2. Touch and drag the Unlock icon to the right. The last screen you were working on
opens. (This is the default lock screen.)
Locking Your Device
When your device is locked, you can only receive incoming calls or make calls to 911.