AYRE C-5xe - Manual (Page 7)

Digital Output
The Ayre C-5xe MP features a balanced AES/EBU
digital audio output on the rear of the unit. This
output is used when connecting to a digital
recording unit or other device, such as an external
digital-to-analog converter (DAC). Additional
information regarding the digital output may be
found in the chapter “Optimization and
Customization”.
An adapter is available from Ayre should you
need to connect the digital output to an S/PDIF
input that uses an RCA connector.
Control Port
The control port on the rear panel of the C-5xe MP
allows the unit to communicate with a system
controller such as a Crestron or AMX. Additional
information regarding the control port may be
found in the chapter “Optimization and
Customization”.
5