LG LGD850 - Manual (Page 73)

73
be displayed. Secured networks are
indicated by a lock icon
.
3 Tap a network to connect to it.
• If the network is open, you are prompted
to confirm that you want to connect to
that network by tapping Connect.
• If the network is secured, you are
prompted to enter a password or
other credentials. (Ask your network
administrator for details).
• Tap the Menu icon to access the
following options.
• Connect by WPS button: Set up a
connection to a WPS (Wi-Fi Protected
Setup) router or other equipment.
• Connect by WPS PIN: View the PIN
used by your device to set up a PIN-
secured connection to a Wi-Fi router
or other equipment.
• Add network: Add additional
networks by entering SSID and other
settings.
• Wi-Fi Direct: Connect to other Wi-Fi
Direct devices.
• Advanced Wi-Fi: Configure additional
settings.
• Interactive tutorial: Learn about
setting up and using Wi-Fi networks,
and other settings.
4 The Status Bar at the top of your screen
will display an icon that indicates your
Wi-Fi status.
TIP

If you are not in range of a Wi-Fi
network and use a network connection.
Additional data charges may apply.
NOTE

Access to the Internet and a wireless
router required. As an added
convenience, AT&T has shipped certain
smartphones with Wi-Fi enabled as a
default setting. Leaving Wi-Fi enabled
when not connected to a Wi-Fi network
may affect battery charge. Qualifying
data plan required.

This device supports WEP, WPA/
WPA2-PSK and 802.1x EAP . (Some
EAP methods are not supported.) If
your Wi-Fi service provider or network
administrator sets encryption for
network security, enter the key in the
pop-up window. If encryption is not
set, this pop-up window will not be
shown. You can obtain the key from
Settings