Maintenance, Troubleshooting, Cleaning your tv – LG 55LM6400 User Manual

Page 40: Screen, frame, cabinet and stand, Power cord

Advertising
background image

MAINTENANCE

Cleaning Your TV

Clean your TV regularly to keep the best performance and to extend the product lifespan.

y

y

Make sure to turn the power off and disconnect the power cord and all other cables first.

y

y

When the TV is left unattended or unused for a long time, disconnect the power cord from the wall
outlet to prevent possible damage from lightning or power surges.

CAUTION

Screen, frame, cabinet and stand

To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.

y

y

Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in
scratches on the screen and image distortions.

y

y

Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners,
lubricants, as these may damage the screen’s finish and cause discoloration.

y

y

Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.

CAUTION

Power cord

Remove the accumulated dust or dirt on the power cord regularly.

TROUBLESHOOTING

Problem

Solution

Cannot control the TV with the

remote control.

y

y

Check the remote control sensor on the product and try again.

y

y

Check if there is any obstacle between the product and the remote control.

y

y

Check if the batteries are still working and properly installed ( to , to ).

No image display and no sound is

produced.

y

y

Check if the product is turned on.

y

y

Check if the power cord is connected to a wall outlet.

y

y

Check if there is a problem in the wall outlet by connecting other products.

The TV turns off suddenly.

y

y

Check the power control settings. The power supply may be interrupted.

y

y

Check if the Auto sleep feature is activated in the Time settings.

y

y

If there is no signal while the TV is on, the TV will turn off automatically after 15

minutes of inactivity.

ENGLISH

40

MAINTENANCE & TROUBLESHOOTING

Advertising