LG VN251S - Manual (Page 70)

68
* For vehicle/accessory
compatibility go to
www.verizonwireless.com/blueto
othchart.
4.1 Add New Device
Pairing is the process that allows
the handset to locate, establish,
and register a 1-to-1 connection
with the target device.
4.1.1 For pairing with a new
Bluetooth ® device
1. Follow the Bluetooth ® accessory
instructions to set the device to
pairing mode.
2. From standby mode, press
[ MENU ].
3. Press Settings & Tools .
4. Press Bluetooth Menu .
5. Press Add New Device .
6. Set the desired device to pairing.
7. The device will appear in Add
New Device menu once it has
been located. Highlight the
device and press .
8. The handset will prompt you for
the passcode. Consult the
Bluetooth
® accessory instructions
for the appropriate passcode
(typically “0000” - 4 zeroes).
Enter the passcode and press
.
When Auto Pair Handsfree is set
to On, the device will try to
automatically pair with the
headset.
9. When pairing with a PC or PDA
is successful, highlight either
Always Ask or Always Connect
and press to connect with the
device.
10. Once connected, you will see
the device listed in the
Bluetooth
® Menu and when the
pair is transferring information,
the Bluetooth
® indicator
will show up on your screen.
4.1.2 Icon Reference in Adding
New Device
When the Bluetooth ® wireless
connection is built and paired
devices are found, the following
icons are displayed.
Settings & Tools
68
VN251S_VZW_UG_EN_V1.0_130410.qxd 4/11/13 1:44 PM Page 68