LG LGUX4750 - Manual (Page 49)

UX4750 49
SpeedTalk SM
Call from Keypad (Barge)
1. From Idle Screen, enter the number.
2. Press and hold SpeedTalk SM Key.
● If the phone number is in the ST contact list, screen
shows the Contact name.
● Sender hears ST talk tone and can begin speaking.
3. Release SpeedTalk SM key.
● Receiver hears incoming barge tone.
● Receiver hears sender’s voice followed by the floor
available tone.
● Sender’s device displays connected screen.
Incoming ST (Barge)
1. Listening screen is shown with the phone number. If
the number is stored in ST Contact List, the sender’s
name is shown.
2. Press and hold SpeedTalk SM key.
● Sender Hears ST talk tone
and can begin speaking.
3. Release SpeedTalk SM key.
● Receiver hears incoming
barge tone.
● Receiver hears callers voice followed by the floor
available tone.
● Sender’s device displays connected screen.
N NO OT TE E All Incoming ST calls come through the Speaker
Phone, unless you have the Speaker Phone turned
off. If you have the Speaker Phone turned off, calls
will come through the earpiece.
Incoming ST (Alert)
1. Buddy Alert Message appears.
2. Select Answer or Ignore and press .
3. If Answer is selected, ‘Press and Hold ST key to Talk’ is
shown.
4. Press and hold SpeedTalk SM key to place a ST call.
● Sender Hears ST talk tone and can begin speaking.
5. Release SpeedTalk SM key.
● Receiver hears incoming barge tone.
● Receiver hears callers voice followed by the floor
available tone.
● Sender’s device displays connected screen.
* ST refers to SpeedTalk SM