The screen color is not normal, I see an after-image on the screen, I see waves on the screen – LG T730SHMK User Manual

Page 15: Have you installed the monitor driver, Troubleshooting

Advertising
background image

A14

Troubleshooting

❐ Do you see basic

discoloration (16 colors)?

❐ Is the screen color

unstable or monochrome?

❐ Do you see black dots on

the screen?

❐ Do you see a partial

blurring on the screen?

• Set the color depth to 256 colors or higher: use ' Control

Panel '->' Display '->' Settings '->' Color Palette '

• Check the connection of the signal cable. Or pull out the

video card of the PC and insert it again.

• This is due to a small amount of foreign or abnormally

florescent material that became fastened on the mask
during manufacturing. It will not affect product
performance.

• This happens due to interference from surrounding

magnetic fields, as created when speakers, steel
structures, or high-voltage lines are placed near the
monitor. Remove any such materials from the immediate
vicinity and use the DEGAUSS icon on the screen
adjustment menu to fix the screen.

❐ Do you see the after-

image even when you
turn off the monitor?

• A premature aging of the monitor pixels may cause the

prolonged display of a single image on the screen. Be
sure to use a screen saver to maximize the service life of
the monitor.

The screen color is not normal.

I see an after-image on the screen.

❐ Do you see the wave

directly on the screen?

• This occurs in inverse proportion to the screen focus,

which can be caused by a particular frequency or video
card. Brighten the screen and use the 'MOIRE' icon on
the screen adjustment menu to adjust the screen.

I see waves on the screen.

❐ Have you installed the

monitor driver?

• Be sure to install the monitor driver from the monitor driver

CD (or diskette) that comes with your monitor. Or, you
can also download the driver from our web site:
http://www.lge.com.

Have you installed the monitor driver?

Advertising