LG LFD22860ST - Manual (Page 14)

REFRIGERATOR INSTALLATION
15
HOW TO REMOVE AND INSTALL THE
PULLOUT DRAWER
IMPORTANT: To avoid possible injury or product or property
damage, you will need two people to perform the following
instructions.
2. Installing Pullout Drawer
• With both hands, hold the center of the bar and pull it
out to let both rails out to full extension simultaneously.
• Insert the door connector (1) to the hanger of the guide (2).
• Lower door into final position and tighten the screws (3)
• Make sure you have a right rail cover for each side.
• Align the top holes of the rail cover with the top holes of
the door supports to assemble the rail cover.
• With the drawer pulled out to full extension, insert the
lower basket (4) in the rail assembly.
WARNING: To prevent accidental child and pet
entrapment or suffocation risk DO NOT allow them to
play inside of drawer.
WARNING: DO NOT step or sit down on Freezer Door.
1
2
3
Right
Rail cover
Left
Rail cover
4
Assembly hole