Getting started with your phone, Charging with usb, Battery temperature protection – LG LGVN250PP User Manual

Page 24: How to install your microsd, Card

Advertising
background image

22

LG Cosmos

TM

Getting Started with Your Phone

3. The charge time varies

depending upon the battery
level.

Charging with USB

You can use your computer to
charge your phone. To be able to
charge with the USB cable, you
need to have the necessary USB
Driver installed on your PC first.
Connect one end of the USB cable
to the charging accessory port on
your phone and the other end to a
high-power USB port on your PC
(commonly located on the front
panel of the computer).

NOTE

Low-power USB ports are not
supported, such as the USB ports
on your keyboard or bus-powered
USB hub. LG USB Driver is
downloadable from the www.lge.com.

Battery Temperature
Protection

If the battery gets overheated, the
phone will automatically turn off.
When you turn the phone back on,
a message pops up alerting you
that the phone was powered off for
your safety.

How to Install Your microSD

TM

Card

1. Locate the microSD

TM

slot on the

right side of the phone and
gently uncover the slot opening.

2. Insert the microSD

TM

card in the

correct direction until it clicks
into the slot. If you insert the
card in the wrong direction, it may
damage your phone or your card.

NOTE

Memory card is
sold separately.

NOTICE

Please make sure that the "B" side faces up
before inserting a charger or data cable into
the charger port of your phone.

Advertising
This manual is related to the following products: