Mounting on a table – LG 26LS3500 User Manual
Page 21
 
ENGLISH
21
ASSEMBLING AND PREPARING
Mounting on a table
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (4 inch) (minimum) space from
the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
(4 inches)
2
Connect the power cord to a wall outlet.
y
y
Do not place the TV near or on sources 
of heat, as this may result in fire or other 
damage.
CAUTION
Adjusting the angle of the TV to suit view
(Depending on model) 
Swivel 20 degrees to the left or right and adjust 
the angle of the TV to suit your view.
20
20
y
y
When adjusting the angle of the TV, 
watch out for your fingers.
- Personal injury may occur if hands or 
fingers are pinched. If the product is 
tilted too much, it may fall, causing 
damage or injury.
CAUTION
Securing the TV to a table
(For 32CS460, 32CS461, 42CS530, 
32/37/42CS560, 32/42LS3400, 32LS3500, 
32LS3510)
Fix the TV to a table to prevent from tilting 
forward, damage, and potential injury. 
Mount the TV on a table, and then insert and 
tighten the supplied screw on the rear of the 
stand.
y
y
To prevent TV from falling over, the TV 
should be securely attached to the floor/
wall per installation instructions. Tipping, 
shaking, or rocking the TV may cause injury.
WARNING