LG HW301G - Manual (Page 19)

19 WATCHING PROJECTOR
WATCHING PROJECTOR
Watching Projector
Turning on for the First
Time
1
Make sure the power cord is
connected correctly.
2
After wait for a moment, press
the POWER button on the remote
control or control panel. (The light on
the control panel will be turned on.)
y Press the INPUT button on the
remote control to select the input
signal you want.
y Verify the lens cap is removed
before turning on the power.
3
Follow the on-screen instructions to
customize your projector settings
according to your preferences.
Language Selects a language to
display.
Focus and Position of
the Screen Image
When an image appears on the
screen, check if it is in focus and fits
the screen properly.
Focus ring
y To adjust the focus of the image,
rotate the focus ring.
Operating the Projector
1
In Standby mode, press the
POWER to turn the projector on.
2
Press INPUT and select desired
input.
3
Control the projector using the
following buttons while you are
watching projector.
Button Description
0 - 9 Entering numbers.
(For HW300Y/HW301Y)
VOL -, + Adjusts the volume level.
MUTE Mutes all sounds.
Q.MENU Accesses the quick
menus. (See p.22)
RATIO Resizes an image.
Key's Adjusts Keystone. (See
p.21)
4
To turn the projector off, press the
POWER.