LG LGLX290 - Manual (Page 31)

2A. Phone Basics 19
You can also place calls from your phone by using
speed dialing numbers from your Contacts (page 25),
using your call history listings (page 49), and voice
dialing a call with Voice Control (page 68).
Dialing Options
When you enter numbers in standby mode, press
OPTIONS (right softkey) and choose from a variety of
dialing options.
To initiate an option, highlight it and press .
ⅷ Contact Details allows you to check Contacts details for
numbers that are already saved in the phone.
ⅷ Save allows you to save the phone number in your
Contacts. (See “Saving a Phone Number” on
page 23.)
ⅷ Hard Pause allows you to enter a hard pause. (See
“Dialing and Saving Phone Numbers With Pauses” on
page 24.)
ⅷ 2-sec Pause allows you to enter a two-second pause.
(See “Dialing and Saving Phone Numbers With
Pauses” on page 24.)
Answering Calls
1. Make sure your phone is on. (If your phone is off,
incoming calls go to voicemail.)
2. Press to answer an incoming call. (Depending
on your settings, you may also answer incoming
calls by pressing any number key or by sliding the
phone open. See “Call Answer Mode” on page 41
for more information.)
Tip To speed dial a phone number from standby
mode, press and hold the speed dial number. If
the speed dial number is two digits, enter the first
digit, and then press and hold the second digit.
(For information on setting up speed dial
numbers, see “Assigning Speed Dial Numbers”
on page 55) (This feature will not work when you
are roaming off the Nationwide Sprint Network;
when roaming you must dial using eleven digits [1
+ the area code + the seven-digit phone
number.])
Tip When you enter numbers in standby mode, press
SEND MSG (left softkey) to quickly send a text
message, picture mail, or voice message to the
dialed number.
Phone Basics
LX290_Eng(1.0)_0601:Sprint_UG_8a 09. 06. 01 11:09 Page 19